Package org.dcm4che.typeddicom.dataelements

Class ReferencedPerformedProcedureStepSequence

java.lang.Object

java.util.AbstractCollection<E>

java.util.AbstractList<T>

org.dcm4che.typeddicom.SequenceWrapper<ReferencedPerformedProcedureStepSequence,ReferencedPerformedProcedureStepSequence.Item>

org.dcm4che.typeddicom.dataelements.ReferencedPerformedProcedureStepSequence

All Implemented Interfaces:

java.lang.Iterable<ReferencedPerformedProcedureStepSequence.Item>, java.util.Collection<ReferencedPerformedProcedureStepSequence.Item>, java.util.List<ReferencedPerformedProcedureStepSequence.Item>

public class ReferencedPerformedProcedureStepSequence
extends org.dcm4che.typeddicom.SequenceWrapper<ReferencedPerformedProcedureStepSequence,ReferencedPerformedProcedureStepSequence.Item>

Name: Referenced Performed Procedure Step Sequence
Keyword: ReferencedPerformedProcedureStepSequence
Tag: (0008,1111)
Value Representation: Sequence
Value Multiplicity: 1

• Described in the contexts:
  • Corneal Topography Map Series Module > Referenced Performed Procedure Step Sequence
  as follows:
  Attribute Name: Referenced Performed Procedure Step Sequence
  Type: 1C
  Attribute Description:

  Uniquely identifies the Performed Procedure Step SOP Instance to which the Series is related (e.g., a Modality or General-Purpose Performed Procedure Step SOP Instance).

  Only a single Item shall be included in this Sequence.

  Required if the Modality Performed Procedure Step SOP Class, or General Purpose Performed Procedure Step SOP Class is supported.

  
  
• Described in the contexts:
  • Instance Availability Notification Module > Referenced Performed Procedure Step Sequence
  as follows:
  Attribute Name: Referenced Performed Procedure Step Sequence
  Type:
  Attribute Description:

  Uniquely identifies the Performed Procedure Step SOP Instance to which this availability notification Instance is related, if any.

  Zero or one Item shall be included in this Sequence.

  Note

  1. This may refer to a different PPS than that encoded in the Composite Instances themselves.

  2. It is typically used for notification about Instances created as a consequence of some scheduled activity.

  
  
• Described in the contexts:
  • SR Document Series Module > Referenced Performed Procedure Step Sequence
  as follows:
  Attribute Name: Referenced Performed Procedure Step Sequence
  Type: 2
  Attribute Description:

  Uniquely identifies the Performed Procedure Step SOP Instance for which the Series is created.

  Zero or one Item shall be included in this Sequence.

  Note

  1. The Performed Procedure Step referred to by this Attribute is the Step during which this Document is generated.

  2. If this Document is generated during the same Performed Procedure Step as the evidence in the current interpretation procedure, this Attribute may contain reference to that Performed Procedure Step.

  3. This Attribute is not used to convey reference to the evidence in the current interpretation procedure. See Current Requested Procedure Evidence Sequence (0040,A375).

  4. This Sequence may be zero length if the Performed Procedure Step is unknown.

  
  
• Described in the contexts:
  • Intravascular OCT Series Module > Referenced Performed Procedure Step Sequence
  • DX Series Module > Referenced Performed Procedure Step Sequence
  • CT Series Module > Referenced Performed Procedure Step Sequence
  • Ophthalmic Tomography En Face Series Module > Referenced Performed Procedure Step Sequence
  • Enhanced US Series Module > Referenced Performed Procedure Step Sequence
  • Visual Acuity Measurements Series Module > Referenced Performed Procedure Step Sequence
  • Ophthalmic Tomography B-scan Volume Analysis Series Module > Referenced Performed Procedure Step Sequence
  • Enhanced Series Module > Referenced Performed Procedure Step Sequence
  • Lensometry Measurements Series Module > Referenced Performed Procedure Step Sequence
  • Autorefraction Measurements Series Module > Referenced Performed Procedure Step Sequence
  • MR Series Module > Referenced Performed Procedure Step Sequence
  • Ophthalmic Axial Measurements Series Module > Referenced Performed Procedure Step Sequence
  • Keratometry Measurements Series Module > Referenced Performed Procedure Step Sequence
  • Visual Field Static Perimetry Measurements Series Module > Referenced Performed Procedure Step Sequence
  • Ophthalmic Thickness Map Series Module > Referenced Performed Procedure Step Sequence
  • Ophthalmic Tomography Series Module > Referenced Performed Procedure Step Sequence
  • Enhanced Mammography Series Module > Referenced Performed Procedure Step Sequence
  • Subjective Refraction Measurements Series Module > Referenced Performed Procedure Step Sequence
  • Tractography Results Series Module > Referenced Performed Procedure Step Sequence
  • Intraocular Lens Calculations Series Module > Referenced Performed Procedure Step Sequence
  • Optical Surface Scanner Series Module > Referenced Performed Procedure Step Sequence
  • Whole Slide Microscopy Series Module > Referenced Performed Procedure Step Sequence
  • Enhanced PET Series Module > Referenced Performed Procedure Step Sequence
  • XA/XRF Series Module > Referenced Performed Procedure Step Sequence
  • Microscopy Bulk Simple Annotations Series Module > Referenced Performed Procedure Step Sequence
  as follows:
  Attribute Name: Referenced Performed Procedure Step Sequence
  Type: 1C
  Attribute Description:

  Uniquely identifies the Performed Procedure Step SOP Instance to which the Series is related.

  Only a single Item shall be included in this Sequence.

  Required if a Performed Procedure Step SOP Class was involved in the creation of this Series.

  
  
• Described in the contexts:
  • Encapsulated Document Series Module > Referenced Performed Procedure Step Sequence
  as follows:
  Attribute Name: Referenced Performed Procedure Step Sequence
  Type: 3
  Attribute Description:

  Uniquely identifies the Performed Procedure Step SOP Instance for which the Series is created.

  Only a single Item is permitted in this Sequence.

  Note

  The Performed Procedure Step referred to by this Attribute is the Step during which this Document is generated.

  
  
• Described in the contexts:
  • Segmentation Series Module > Referenced Performed Procedure Step Sequence
  • Parametric Map Series Module > Referenced Performed Procedure Step Sequence
  as follows:
  Attribute Name: Referenced Performed Procedure Step Sequence
  Type: 1C
  Attribute Description:

  Uniquely identifies the Performed Procedure Step SOP Instance to which the Series is related

  Only a single Item shall be included in this Sequence.

  Required if a Performed Procedure Step SOP Class was involved in the creation of this Series.

  
  
• Described in the contexts:
  • General Series Module > Referenced Performed Procedure Step Sequence
  as follows:
  Attribute Name: Referenced Performed Procedure Step Sequence
  Type: 3
  Attribute Description:

  Uniquely identifies the Performed Procedure Step SOP Instance to which the Series is related.

  Only a single Item is permitted in this Sequence.

  
  
• Described in the contexts:
  • Enhanced RT Series Module > Referenced Performed Procedure Step Sequence
  as follows:
  Attribute Name: Referenced Performed Procedure Step Sequence
  Type: 1C
  Attribute Description:

  Uniquely identifies the Performed Procedure Step SOP Instance that resulted in creation of the Series (e.g. a Modality or Unified Procedure Step SOP Instance).

  Only a single Item shall be included in this Sequence.

  Required if the series has been created as a result of a single procedure step request and the Instance-Level Referenced Performed Procedure Step Sequence (3010,0044) is not present.

  If different Instances in the series are created as a result of a procedure step, the Instance-Level Referenced Performed Procedure Step Sequence (3010,0044) in the DICOM Standard Part 3 - Section C.36.4 shall be used.

  
  
• Described in the contexts:
  • Key Object Document Series Module > Referenced Performed Procedure Step Sequence
  as follows:
  Attribute Name: Referenced Performed Procedure Step Sequence
  Type: 2
  Attribute Description:

  Uniquely identifies the Performed Procedure Step SOP Instance for which the Series is created.

  Zero or one Item shall be included in this Sequence.

  Note

  See notes on this Attribute in DICOM Standard Part 3 - Section C.17.1

  
  
• Described in the contexts:
  • RT Series Module > Referenced Performed Procedure Step Sequence
  as follows:
  Attribute Name: Referenced Performed Procedure Step Sequence
  Type: 3
  Attribute Description:

  Uniquely identifies the Performed Procedure Step SOP Instance to which the Series is related.

  One or more Items are permitted in this Sequence.

  
  

Nested Class Summary

Nested Classes

Modifier and Type	Class	Description
static interface	ReferencedPerformedProcedureStepSequence.Builder<SELF extends ReferencedPerformedProcedureStepSequence.Builder<SELF,T>,T extends ReferencedPerformedProcedureStepSequence.Holder>
static interface	ReferencedPerformedProcedureStepSequence.Holder	A class implementing this interface can hold attributes which contain the DICOM tag "Referenced Performed Procedure Step Sequence" (see ReferencedPerformedProcedureStepSequence)
static class	ReferencedPerformedProcedureStepSequence.Item
static class	ReferencedPerformedProcedureStepSequence.SimpleHolder

Field Summary

Fields

Modifier and Type	Field	Description
static java.lang.String	PRIVATE_CREATOR	The Private Creator associated with this class.
static int	TAG	The DICOM Tag associated with this class.

Fields inherited from class org.dcm4che.typeddicom.SequenceWrapper

VALUE_REPRESENTATION

Fields inherited from class java.util.AbstractList

modCount

Constructor Summary

Constructors

Constructor	Description
ReferencedPerformedProcedureStepSequence(org.dcm4che3.data.Sequence sequence)	Creates a new Referenced Performed Procedure Step Sequence object which wraps the provided sequence.

Method Summary

Modifier and Type	Method	Description
java.lang.String	getPrivateCreator()
int	getTag()

Methods inherited from class org.dcm4che.typeddicom.SequenceWrapper

add, equals, get, getSequence, getValueRepresentation, hashCode, remove, set, size, toString

Methods inherited from class java.util.AbstractList

add, addAll, clear, indexOf, iterator, lastIndexOf, listIterator, listIterator, removeRange, subList

Methods inherited from class java.util.AbstractCollection

addAll, contains, containsAll, isEmpty, remove, removeAll, retainAll, toArray, toArray

Methods inherited from class java.lang.Object

clone, finalize, getClass, notify, notifyAll, wait, wait, wait

Methods inherited from interface java.util.Collection

parallelStream, removeIf, stream, toArray

Methods inherited from interface java.lang.Iterable

forEach

Methods inherited from interface java.util.List

addAll, contains, containsAll, isEmpty, remove, removeAll, replaceAll, retainAll, sort, spliterator, toArray, toArray

Field Detail

PRIVATE_CREATOR

public static final java.lang.String PRIVATE_CREATOR

The Private Creator associated with this class.

TAG

public static final int TAG

The DICOM Tag associated with this class.

See Also:

Constant Field Values

Constructor Detail

ReferencedPerformedProcedureStepSequence

public ReferencedPerformedProcedureStepSequence(org.dcm4che3.data.Sequence sequence)

Creates a new Referenced Performed Procedure Step Sequence object which wraps the provided sequence.

Parameters:

sequence - the Sequence object to be linked.

Method Detail

getPrivateCreator

public java.lang.String getPrivateCreator()

Specified by:

getPrivateCreator in class org.dcm4che.typeddicom.SequenceWrapper<ReferencedPerformedProcedureStepSequence,ReferencedPerformedProcedureStepSequence.Item>

getTag

public int getTag()

Specified by:

getTag in class org.dcm4che.typeddicom.SequenceWrapper<ReferencedPerformedProcedureStepSequence,ReferencedPerformedProcedureStepSequence.Item>